Any regular swimmer would know that debris, algae, and other particles settle underneath the water in the pool and make the pool water dirty. At this time, swimming in a pool is unhygienic and also, may cause serious complications.
So, you need to clean the bottom of your pool to remove all these debris. A pool vacuum is all that you need to clean off the pool. But what if you don’t own a specialized pool vacuum?
Here’s a solution. You can use your garden hose to make a pool vacuum. And we are going to describe the same. At the end of this detailed write-up, you will learn:
1. How to make a pool vacuum using a garden hose.
2. How to use the garden hose made a pool vacuum to clean pool
So, let’s start.
Table of Contents
Making A Pool Vacuum Using Garden Hose:
To make a pool vacuum with a garden hose, you will need the following things:
A garden hose:
You may use a new or old garden hose for the purpose. Ideally, you should use a 25ft no-kink garden hose since a pool comes with ample space. On the other hand, use a smaller garden hose for inflatable kid’s pool.
Vacuum bag:
The vacuum bag will serve as a suction pressure creator. The suction prevents debris from going back in the pool from the vacuum. Remember that it is an exceptionally crucial part of your vacuum cleaner.
Plastic funnel:
A garden hose has a comparatively small outer diameter. It means you will need a considerable amount of time to clean the pool debris. So, you should use a plastic funnel with a bigger diameter. You can use any 500 ml bottle and cut it in a 45-degree angle to get the desired funnel.
Telescopic pole:
The telescopic pool pole varies in length. In general, pool owners use the tool to capture the floating debris right on the pool.
Now that we roughly know what tools we need to create the garden hose pool vacuum, how about knowing the steps?
Connecting The Vacuum Bag:
Once you are ready with the right garden hose, at first, you should join the vacuum bag with one end of the tube. You must ensure that the vacuum bag connects with the right end of the tube. You can determine it by observing the garden hose end with a valve that will connect with the vacuum bypass.
Attaching the Telescopic Pole:
Now, attach the telescopic pole or handle with the garden hose. To insert the garden hose with the telescopic handle, you will need to remove the handle from its leaf skimmer.
Some handles may come with two pins attachment. You will require to depress them to remove the stem from the skimmer. For others, you may need to twist the leaf skimmer to remove the telescopic handle.
Now, find the handle hole on the pool vacuum of the garden hose and attach the telescopic pole in it. Nonetheless, if you find it tough to connect the telescopic handle with the tube, try using a knot to tie both tools.
That’s it. You are ready with your garden hose pool vacuum to clean the pool water.
How to Clean Pool Using the Garden Hose Pool Vacuum?
Once you are ready with the pool vacuum made using the garden hose, removing the debris from pool water is pretty straightforward.
- Hold onto your telescopic handle firmly and use it to slowly lower down the garden hose into the pool water.
- Make sure that the handle reaches the bottommost part of the pool so that the vacuum may collect all the debris lurking underneath the water.
- Slowly and gently use the vacuum to scan every inch of the pool floor. However, pay more attention to where you see more debris.
- Repeat the scanning process at least a few times to ensure that the vacuum has got hold of all grime and debris.
- Lastly, carefully take the pool vacuum out of the water so that no debris can stir back to pool water again.
Congratulations, you have successfully cleaned every inch of the pool using your handmade garden hose pool vacuum.
Note:
Put the debris securely in a bin. Then, disconnect the telescopic pole, plastic funnel, and the vacuum bag so that you can get back to the regular watering jobs with the garden hose.
Final Words
If you have a backyard swimming pool, it will save you from going to public pools. It’s imperative right at this moment when Covid-19 has hit hard every corner of the world, and self-isolation is a must. So, clean your pool with this easy DIY garden hose pool vacuum and spend time in the pool. The process of making a pool vacuum with a garden hose doesn’t need much time and money also.
Hence, get your pool clean and jump on it to swim. It will help you have some fun and remain stress-free.
Leave a Reply
You must be logged in to post a comment.